|
| |
TM 9-2330-398-24
3-36. EMERGENCY VALVE AND FLOAT PIPING REPLACEMENT (continued).
3.
Remove two screws (13) and nuts (14), coupling (12), seal (11), and pipe (10) from semitrailer. Discard seal.
4.
Remove two screws (15) and nuts (16), coupling (17), seal (18), and pipe (10) from manifold assembly (19).
Discard seal.
NOTE
Do not loose screws and nuts as they are an integral part of couplings.
b. INSTALLATION
1.
Install pipe (10) on manifold assembly (19) with two screws (15) and nuts (16), new seal (18), and coupling (17).
2.
Install pipe (10) on semitrailer with two screws (13) and nuts (14), new seal (11), and coupling (12).
3.
Install float piping (5) on pipe (10) with two screws (7) and nuts (8), new seal (9), and coupling (6).
4.
Install float piping (5) on control valve assembly (20) with two screws (3) and nuts (2), new seal (4), and coupling
(1).
FOLLOW-ON MAINTENANCE:
• Disconnect ground (refer to TM 9-2330-398-10).
3-113
|
