|
| |
TM 9-2330-398-24
3-18. ENGINE OIL FILTER HEAD REPLACEMENT.
This Task Covers:
a. Removal
b. Installation
Initial Setup:
Tool/Test Equipment:
•
Fuel filters (primary and secondary) removed
•
General mechanic's tool kit (Item 4, Appendix B)
(para 2-109).
•
Engine oil filter removed (para 2-106).
Materials/Parts:
•
Semitrailer bonded and grounded (refer to
•
Gasket (Item 48, Appendix F)
TM 9-2330-398-10).
•
Lockwasher (3) (Item 113, Appendix F)
•
Negative battery cable disconnected (para 2-33).
•
Blower housing removed (para 3-26).
Equipment Conditions:
•
Oil cooler lines removed from oil filter adapter
•
Semitrailer uncoupled (refer to TM 9-2330-398-10).
(para 3-19).
a.
REMOVAL
1.
Remove oil line (5) from elbow (6), and remove elbow (6) from engine oil filter head (2).
2.
Remove oil line (10) from elbow (8), and remove elbow (8) from engine oil filter head (2).
3.
Remove oil line (9) from elbow (7), and remove elbow (7) from engine oil filter head (2).
4.
Remove three screws (4) and lockwashers (3), engine oil filter head (2), and gasket (1) from engine. Discard
lockwashers and gasket.
b.
INSTALLATION
1.
Install new gasket (1) and engine oil filter head (2) on engine with three screws (4) and new lockwashers (3).
2
Install elbow (7) on engine oil filter head (2), and install oil line (9) on elbow (7).
3
Install elbow (8) on engine oil filter head (2), and install oil line (10) on elbow (8).
4
Install elbow (6) on engine oil filter head (2), and install oil line (5) on elbow (6).
3-54
|
