|
| |
TM 9-2330-398-24
3-13. 11/4-INCH HOSE REEL ASSEMBLY REPLACEMENT (continued
7.
Remove four mounting screws (20), eight
washers (18), and four self-locking nuts (17)
from hose reel (22). Discard self-locking nuts.
8.
With the aid of an assistant, lift hose reel (22)
from cabinet (19).
b.
INSTALLATION
1.
With the aid of an assistant, lift and position
hose reel (22) in cabinet (19).
2.
Install four mounting screws (20), eight washers
(18), and four new self-locking nuts (17) on hose
reel. Tighten self-locking nuts between 25 and
35 Ib-ft (34 and 47 Nom).
3.
Install new seal (14), lower split coupling half (15), upper split coupling half (13), and two nuts (16) on hose reel
(22). Tighten nuts (16) between 57 and 63 Ib-ft (77 and 85 Nom).
3-40
|
