|
| |
TM 9-2330-398-24
Section III. UNIT PREVENTIVE MAINTENANCE CHECKS AND SERVICES (P910)
Paragraph
Page
Number
Paragraph Title
Number
2-8
General.................................................................................................................................................2-4
2-9
Service Intervals...................................................................................................................................2-4
2-10
Reporting Repairs ................................................................................................................................2-4
2-11
General PMCS Procedures..................................................................................................................2-4
2-12
Specific PMCS Procedures ..................................................................................................................2-5
Table 2-1 Unit Preventive Maintenance Checks and Services (PMCS) for the M969A2 .....................................2-6
2-8.
GENERAL
To ensure that the M969A2 semitrailers are ready for operation at all times, they must be inspected on a regular basis so
defects may be found before they result in serious damage, equipment failure, or injury to personnel. Table 2-1 is a listing
of systematic instructions on inspections, adjustments, and corrections to be performed by Unit maintenance.
2-9.
SERVICE INTERVALS.
a.
Perform the PMCS procedures listed in Table 2-1 at the following intervals:
•
Monthly - once every month.
•
Semiannual - once every six months.
•
Annual - once each year.
b. PMCS items and intervals are to be scheduled on DD Form 314 in accordance with DA Pam 738-750.
c. After operation in water, mud, or loose sand, the semitrailer should be cleaned as soon as possible. Lubricate
without waiting for the next scheduled service.
d. Lubrication instructions are included in Appendix G. For Operator/Crew lubrication instructions, refer to TM 9-
2330-398-10.
2-10.
REPORTING REPAIRS.
Report all defects and corrective actions on DA Form 2404. If a serious problem is found, IMMEDIATELY report it to your
supervisor.
2-11.
GENERAL PMCS PROCEDURES.
WARNING
Drycleaning solvent P-D-680 is toxic and flammable. Always wear protective
goggles and gloves, and use only in a well-ventilated area Avoid contact with skin,
eyes, and clothes, and DO NOT breathe vapors. DO NOT use near open flame or
excessive heat.
2-4
|
