|
| |
TM 9-2330-398-24
2-120. FILTER SEPARATOR FILTER ELEMENTS REPLACEMENT (M & E INDUSTRIES MODEL) (continued).
NOTE
Install two screws with holes in their shafts at the top and bottom of access cover so
antipilferage seals can be installed.
9.
Install 12 screws (9), 24 washers (3), 12 new lockwashers (4), and 12 nuts (5) on access cover (8) and mounting
flange of filter separator (1).
10.
Install antipilferage seal (6) through bottom pair of screws (9) and one through top pair of screws (9). Trim excess
wire.
FOLLOW-ON MAINTENANCE:
•
Disconnect ground (refer to TM 9-2330-398-10).
•
Connect negative battery cable (para 2-33). L.
2-262
|
