| |
TM 9-2330-398-24
2-116. HOSE REEL CONDUIT ASSEMBLY REPLACEMENT.
This Task Cover:
a. Removal
b. Installation
Initial Setup:
Tool/Test Equipment:
Semitrailer bonded and grounded (refer to
General mechanic's tool kit (Item 4,
TM 9-2330-398-10).
Appendix B)
Negative battery cable disconnected (para 2-33).
Cable assembly removed from hose reel conduit (pare
Equipment Conditions:
2-115).
Semitrailer uncoupled (refer to TM 9-2330-398-10).
WARNING
When
troubleshooting
an
electrical
malfunction
or
performing
electrical
maintenance, ALWAYS disconnect intervehicular electrical cable from semitrailer
and negative battery cables at batteries. Failure to follow this warning may create
a spark and explosion, resulting in serious injury or death to personnel.
a.
REMOVAL
1. Loosen two conduit connectors (6) on two bushings (7) on two hose reel rewind switches (8).
2. Remove two conduits (2) from two conduit elbows (4).
3. Remove two conduit connectors (6) and bushings (7) from two hose reel rewind switches (8).
4. Remove two conduit elbows (4) from two junction boxes (3 and 5).
5. Remove two conduits (2) from four conduit elbows (4).
6. Remove conduit (2) from two conduit bushings (1).
7. Remove four conduit elbows (4) from two junction boxes (3 and 5) and semitrailer.
b.
INSTALLATION
1. Install four conduit elbows (4) on semitrailer and two junction boxes (3 and 5).
2. Install conduit (2) on two conduit bushings (1).
3. Install two conduits (2) on four conduit elbows (4).
4. Install two conduit elbows (4) in two junction boxes (3 and 5).
5. Install two bushings (7) and conduit connectors (6) on two hose reel rewind switches (8).
2-253
|