|
| |
TM 9-2330-398-24
2-112. ENGINE CONTROL PANEL REPAIR (continued).
11.
Control Panel Access Cover
(a)
Remove two bumpers (80) from access cover (68).
(b)
Remove two screws (82) and self-locking nuts (69) and wire rope (81) from control panel (5). Discard self-
locking nuts.
(c)
Remove six screws (79) and self-locking nuts (78) and access cover (68) from hinge (70). Discard self-
locking nuts.
(d)
Remove six screws (77) and self-locking nuts (73), two springs (72), and hinge (70) from bracket (71).
Discard self-locking nuts.
(e)
Remove four screws (74), washers (75), and self-locking nuts (76) and bracket (71) from control panel (5).
Discard self-locking nuts.
c.
INSPECTION
Visually check instruments for broken glass, damaged terminals, corrosion, and damage to cases and capillary
tubes. Check wiring for broken or damaged insulation and for broken wires. Check couplings and lines to pump,
filter/separator, fuel, and oil gages for damage.
2-241
|
