|
| |
TM 9-2330-398-24
2-112. ENGINE CONTROL PANEL REPAIR (continued).
b.
DISASSEMBLY
NOTE
Disassembly is the same for all
three switches.
1.
Engine Switches (Preheater, Starter, and
Engine).
(a) Remove screw (33), washer (38), and lever
(34) from switch (36).
(b) Remove nut (37), lockwasher (35), and
switch (36) from control panel (5). Discard
lockwasher.
2.
Oil Pressure Gage
(a) Remove adapter (13) and coupling (42)
from oil pressure gage (16).
(b) Remove two nuts (43), bracket (44), and oil
pressure gage (16) from control panel (5).
3.
Fuel Pressure Gage
(a) Remove adapter (13) and coupling (40)
from fuel pressure gage (17).
(b) Remove two nuts (41), bracket (39), and
fuel pressure gage (17) from control panel
(5).
4.
Filter/Separator Gage
(a) Remove two screws (49), washers (46),
and nuts (47) and filter/separator gage (14)
from control panel (5).
(b) Remove two adapters (13) and elbows (48)
from filter/separator gage (14).
5.
Pump Pressure Gage
(a) Remove adapter (13) and snubber (45)
from pump pressure gage (18).
(b) Remove two nuts (50) and brackets (51)
and pump pressure gage (18) from control
panel (5).
2-239
|
