|
| |
TM 9-2330-398-24
2-97. ENGINE FUEL TANK REPLACEMENT (continued).
b. INSTALLATION
1.
Install drain plug (10) and fuel tank cap (4) in fuel tank (6).
2.
Position fuel tank (6) in place on semitrailer and secure with four screws (12) and washers (11), two mounting
straps (5), and ground cable (7).
3.
Install screw (8), washer (9), and ground cable (7) on fuel tank (6).
4.
Install two elbows (2) and bushings (3) on fuel tank (6).
5.
Connect two fuel lines (1 and 13) to top of fuel tank (6).
NOTE
• During operations below 32°F (0°C), use No. 1 diesel fuel.
• During operations above 32°F (0°C), use No. 2 diesel fuel.
6.
Remove fuel tank cap (4) and fill fuel tank (6) with fresh fuel, then install fuel tank cap (4).
c. FUEL SYSTEM BLEEDING
1.
Position suitable container in place under fuel injection pump (14).
2.
Disconnect fuel return line (13) from fuel injection pump (14).
2-202
|
