|
| |
TM 9-2350-253-34-2
2-93. ENGINE INTAKE AIR CLEANER REPLACEMENT.
This task covers:
a.
Removal
b.
Installation
Initial Setup:
Tools/Test Equipment:
Equipment Conditions:
•
General mechanic's tool kit (Item 4, Appendix B)
•
Semitrailer uncoupled (refer to TM 9-2330-398-10).
Material/Parts:
•
Self-locking nut (4) (Item 170, Appendix E)
a.
REMOVAL
1.
Remove dust cap (5) from engine intake
aircleaner (6).
2.
Remove hose clamp (2) and air intake hose
(1) from air cleaner (6).
3.
Remove four screws (3) and self-locking
nuts (8) from two loop clamps (7). Discard
self-locking nuts.
4.
Remove air cleaner (6) and two loop clamps
(7) from semitrailer.
5.
Loosen two screws (4) and remove loop
clamps (7) from air cleaner (6).
b.
INSTALLATION
1.
Install two loop clamps (7) on air cleaner (6),
but do not tighten two screws (4).
2.
Install air cleaner (6) and two loop clamps (7) on semitrailer and secure with four screws (3) and new self-
locking nuts (8).
3.
Install dust cap (5) on air cleaner (6).
4.
Rotate air cleaner (6) in two loop clamps (7) until dust cap (5) is pointing straight up. Tighten two screws (4)
on loop clamps (7).
5.
Install air intake hose (1) on air cleaner (6) and secure with hose clamp (2).
FOLLOW-ON MAINTENANCE:
•
None.
2-196
|
