|
| |
TM 9-2330-398-24
2-70.
LANDING GEAR HANDCRANK AND DRIVE UNIT REPLACEMENT (continued).
b.
INSTALLATION
NOTE
Drive unit is to be installed on curb-side landing gear leg.
1.
Install handle (18) on drive unit (1) with screw (19), washer (14), and new self-locking nut (13).
2.
Install handcrank (16) on handle (18) with screw (17) and new self-locking nut (15).
3.
Install coupling (7) on drive unit (1) with screw (5), washer (8), and new self-locking nut (10).
4.
Install drive unit (1) on landing gear leg (9) with four screws (2), washers (3), and new self-locking nuts (4).
5.
Install coupling (7) on landing gear leg (9) with screw (6), washer (11), and new self-locking nut (12).
FOLLOW-ON MAINTENANCE:
• Lower front end of semitrailer (refer to TM 9-2330-398-10).
• Disconnect ground (refer to TM 9-2330-398-10).
2-164
|
