|
| |
TM 9-2330-398-24
2-69.
LANDING GEAR LEG REPLACEMENT (continued).
b.
INSTALLATION
NOTE
•If installing "tall" shoes on landing
gear legs to configure M969A2 for
M931A1/A2 and M932A1/A2 with
super single tires and wheels, do
step 4 only.
•Landing gear leg installation is the
same for both legs.
1.
Install shaft coupling (8) on shaft (9) with screw
(10), washer (18), and new self-locking nut (17).
2.
Install landing gear leg (7) on semitrailer with
eight screws (14) and new self-locking nuts (12)
and 16 washers (13).
3.
Install shaft coupling (8) on landing gear leg (7)
with screw (11), washer (15), and new self-
locking nut (16).
4.
Install shaft (25), landing gear shoe (27), and
two washers (26) on landing gear leg (7). Install
new spring pin (24) in shaft (25).
5.
Install sliding stay (21) on landing gear leg (7)
with screw (19), new self-locking nut (23), and
two washers (22 and 20).
6.
Install screw (1), new self-locking nut (2), and
two washers (3) on landing gear leg (7).
7.
Install screw (4), new self-locking nut (5), and
two washers (6) on landing gear leg (7).
FOLLOW-ON MAINTENANCE:
• Install landing gear handcrank and drive unit (para 2-
70).
2-162
|
