|
| |
TM 9-2330-398-24
2-68.
LANDING GEAR GROUND BOARD REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Tools/Test Equipment:
Equipment conditions:
• General mechanic's tool kit (Item 4, Appendix B)
• Semitrailer uncoupled (refer to TM 9-2330-398-10).
Materials/Parts:
• Self-locking nut (Item 172, Appendix F)
a.
REMOVAL
1. Remove two screws (4), washers (5), and nuts
(6) from landing gear ground board (1).
2. Remove handle (2) and chain (3) from board (1).
3. Remove screw (7), self-locking nut (8), two
washers (9), and chain (3) from landing gear leg
(10). Discard self-locking nut.
b.
INSTALLATION
1. Install chain (3) on landing gear leg (10) with
screw (7), two washers (9), and new self-locking
nut (8).
2. Install chain (3) and handle (2) on board (1) with
two screws (4), washers (5), and nuts (6).
FOLLOW-ON MAINTENANCE:
• None
HIDDEN
2-160
|
