|
| |
TM 9-2330-398-24
2-65.
TIRE AND TUBE REPAIR.
This Task Covers:
a.
Service
b.
Inspection
c.
Repair
Initial Setup:
Tools/Test Equipment:
Equipment Conditions:
• General mechanic's tool kit (Item 4,
• Semitrailer uncoupled (refer to TM 9-2330-398-10).
Appendix B)
• Tire and wheel assembly removed (para 2-62).
a.
SERVICE
Using air pressure gage, check tires for correct pressure. For hard surface roads, inflate radial tires to 65 psi
(448-17 kPa); for cross-country and sand, inflate tires to 45 psi (310.8 kPa).
b.
INSPECTION
1. Remove any objects, such as nails or glass, from tires.
2. Check for apparent loss of air, unusual wear, or missing valve caps. Replace as necessary.
c.
REPAIR
CAUTION
• Radial tubes must be used with radial tires. Failure to do so will result in damage to equipment.
• DO NOT use bias tires on the semitrailer. Failure to follow this caution will result in damage to
equipment.
Refer to TM 9-2610-200-14 for instructions on dismounting tire, repairing tire, and mounting tire and tube on rim.
FOLLOW-ON MAINTENANCE:
• Install tire and wheel assembly (para 2-62).
2-157
|
