|
| |
TM 9-2330-398-24
2-59.
FULL FUNCTION VALVE AND DIRECT UNEAR VALVE REPLACEMENT.
This Task Covers:
a.
Removal of Fuel Function Valve
b.
Removal of Direct Linear Valve
c.
Installation of Fuel Function Valve
d.
Installation of Direct Linear Valve
e.
Test
Initial Setup:
Tools/Test Equipment:
Equipment Conditions:
• General mechanic's tool kit (Item 4, Appendix B)
• Semitrailer uncoupled (refer to TM 9-2330-398-10).
• Semitrailer bonded and grounded (refer to
Materials/Parts:
TM 9-2330-398-10).
• Sealing compound (Item 27, Appendix C)
• Air reservoirs drained (refer to TM 9-2330-398-10).
• Soap (Item 28, Appendix C)
a.
REMOVAL OF FULL FUNCTION VALVE
1. Disconnect two fittings (10 and 12) from tee fitting (11), and remove tee fitting (11) from full function valve (9).
2. Disconnect fitting (15) from elbow (13), and remove elbow (13) and hose separator (14) from valve (9).
3. Remove valve (9) from pipe nipple (16) on air reservoir (17).
2-146
|
