|
| |
TM 9-2330-398-24
2-39.
LEAD ASSEMBLY 12275206 REPLACEMENT (continued).
b.
INSTALLATION
NOTE
• All marker lights are Installed the same way.
• Repair wiring harness as required (para 2-46).
1.
Starting at marker light box (1), pull lead assembly 12275206 (14) through conduit (7) and through road-side
composite light box.
2.
Install new connector on lead 489 (15) of lead assembly 12275206 (14).
3.
Connect lead 489 (15) connector of lead assembly 12275206 (14) to lead connector (17) of lead assembly
12275205 (16) at road-side composite light box.
4.
Connect three lead 489 connectors (8, 9, and 10) of lead assembly 12275206 (14) to three lead connectors (10,
11, and 12) of marker light bodies (3).
5.
Install 12 screws (5) and washers (6) and three marker light bodies (3) on marker light box (1).
6.
Install six screws (4) and three lens housing covers (2) on marker light bodies (3).
FOLLOW-ON MAINTENANCE:
•
Disconnect ground (refer to TM 9-2330-398-10).
•
Install road-side composite light cover plate (para 2-30).
2-103
|
