|
| |
TM 9-2330-398-24
2-37.
FRONT MARKER UGHTS LEAD ASSEMBLY REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Tools/Test Equipment:
Equipment
Conditions:
•
General mechanic's tool kit (Item 4, Appendix B)
•
Semitrailer uncoupled (refer to TM 9-2330-398-10).
•
Semitrailer bonded and grounded (refer to
Materials/Parts:
TM 9-2330-398-10).
•
Gasket (2) (Item 43, Appendix F)
•
Gasket (Item 45, Appendix F)
•
Lockwasher (6) (Item 94, Appendix F)
a.
REMOVAL
1.
Remove six screws (8) and lockwashers (7), access cover (6), and gasket (5) from access hole (4). Discard
gasket and lockwashers.
NOTE
Front blackout marker light boxes are located on curb side and road side of semitrailer. Removal of cover
plate is the same for both boxes.
2.
Remove 16 screws (9) and two cover plates (10) and gaskets (11 ) from curbside and road-side front blackout
marker light boxes (1). Discard gaskets.
2-96
|
