|
| |
TM 9-2330-398-24
2-30.
COMPOSITE STOPLIGHT, TAILLIGHT, AND BLACKOUT LIGHT REPAIR (continued).
b.
DISASSEMBLY
1.
Remove two screws (8) and lockwashers (7), cover plate (1), and gasket (9) from composite light housing (6).
Discard gasket and lockwashers.
2.
Loosen six captive screws (13). Remove lens door (12) and preformed packing (14) from housing (6). Discard
preformed packing.
3.
Remove two blackout lights (11) and/or incandescent lamps (5) from housing (6).
c.
ASSEMBLY
1.
Install two blackout lights (11) and/or incandescent lamps (5) in housing (6).
2.
Install lens door (12) and new preformed packing (14) on housing (6) with six captive screws (13).
3.
Install cover plate (1) and new gasket (9) on housing (6) with two screws (8) and new lockwashers (9).
d.
INSTALLATION
1.
Install new gasket (4) on cover plate (1), and connect composite light wires (10) to semitrailer harness.
2.
Install composite light (3), cover plate (1), and gasket (4) on semitrailer with six screws (2).
FOLLOW-ON MAINTENANCE:
• Connect negative battery cable (para 2-33).
2-75
|
