|
| |
TM 9-2330-272-14
4-103. SLUG CONTROL VALVE REPLACEMENT.
This Task Covers: Replacement
Initial Setup:
Equipment Conditions:
Materials/Parts:
• Tank purged (para 4-64).
• Rags (Item 14, Appendix E)
Tools/Test Equipment:
• Two gaskets
• General mechanic’s tool kit
• Eight lockwashers
• Common no. 1 shop set
A drain pan should be used to catch any draining fluid. Ensure that all spills are cleaned
up.
1.
Remove drain plug (8) and allow slug control valve (7) to drain.
2.
Disconnect tube (6) from slug control valve (7).
3.
Remove eight nuts (1), lockwashers (2), screws (5), slug control valve (7), and two gaskets (4) from tubes (3).
Discard lockwashers and gaskets.
4.
Install two new gaskets (4) and slug control valve (7) on tubes (3) with eight screws (5), new Iockwashers (2),
and nuts (1).
5.
Connect tube (6) to slug control valve (7).
6.
install drain plug (8) on slug control valve (7).
4-224
|
