|
| |
TM 9-2330-272-14
4-95. EMERGENCY RELIEF VALVE REPLACEMENT.
This Task Covers: Replacement
Initial Setup:
Equipment Conditions:
Materials/Parts:
Tank purged (para 4-64).
Rags (Item 14, Appendix E)
Control cable assembly disconnected from emer-
One gasket
gency relief valve (para 4-97).
Six lockwashers
Tools/Test Equipment:
General mechanic’s tool kit
Common no. 1 shop set
1.
Remove two nuts (3), screws (10), and coupler (2) from emergency relief valve (8) and tube (1).
2.
Slide gasket (9) onto tube (1).
NOTE
A drain pan should be used to catch any draining fluid. Ensure that all spills are cleaned
up.
3.
Remove six nuts (7), Iockwashers (6), emergency relief valve (8), and gasket (5) from semitrailer (4). Discard
Iockwashers and gasket.
4.
Remove gasket (9) from tube (1) and discard.
TA702831
4-206
|
