|
| |
TM 9-2330-272-14
4-94. TUBES, COUPLERS, AND HOSE CONNECTIONS REPLACEMENT (Con’t).
NOTE
Tubes are typically supported by U-bolts in-
stalled at brackets which are welded to frame.
7.
If present, remove tubes from U-bolt brackets (16):
Remove two nuts (15), Iockwashers (14),
U-bolt (17), and tube (1) from U-bolt bracket
(16). Discard Iockwashers.
1 .
If removed, install tubes on U-bolt brackets (16):
(a) Position tube (1) at U-bolt bracket (16).
(b) Install U-bolt (17) on tube (1) and U-bolt bracket (16) with two new Iockwashers (14) and nuts (15).
2.
If removed, install tubes on gate valves (10):
(a) Position new gasket (9) and tube (1) on
gate valve (10).
(b) Install screws (13), new Iockwashers (12),
and nuts (11) on tube (1) and gate valve
(10).
TA702825
4-200
|
