|
| |
TM 9-2330-272-14
4-93. SEDIMENT STRAINER MAINTENANCE.
This Task Covers:
a.
Removal
d. Assembly
b.
Disassembly
e.
Installation
c.
Cleaning and Inspection
Initial Setup:
Equipment Conditions:
Materials/Parts:
Tank purged (para 4-64).
Rags (Item 14, Appendix E)
Tools/Test Equipment:
Dry cleaning solvent (Item 16, Appendix E)
General mechanic’s tool kit
Three gaskets
Common no. 1 shop set
Eight Iockwashers
NOTE
To service sediment strainer, perform subparagraphs b through d. Sediment strainer
does not need to be removed to be serviced.
NOTE
A drain pan should be used to catch any draining fluid. Ensure that ail spills are cleaned
up.
1 .
Remove drain plug (7) and allow any accumulated fuel to drain.
2 .
Remove eight nuts (6), lockwashers (5), screws (4), sediment strainer (3), and two gaskets (2) from two tubes
(1). Discard lockwashers and gaskets.
TA702819
4-194
|
