|
| |
TM 9-2330-272-14
4-89. FLOAT ASSEMBLY REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Materials/Parts:
Tools/Test Equipment:
One gasket
General mechanic’s tool kit
Eight lockwashers
Common no. 1 shop set
1.
Remove eight screws (5), lockwashers (4), float assembly (3), and gasket (2) from filter-separator (1). Discard
Iockwashers and gasket.
2.
Remove draincock (7) and adapter (6) from float assembly (3).
1.
Install adapter (6) and draincock (7) on float assembly (3).
2.
Install new gasket (2) and float assembly (3) on filter-separator (1) with eight new Iockwashers (4) and screws
(5).
TA702814
4-188
|
