| |
TM 9-2330-272-14
4-87. FILTER-SEPARATOR SERVICING (M131A5C EARLY MODEL) (Con’t).
1.
Clean all parts with a clean rag.
2.
Inspect elements and fuses for damage. Replace damaged parts.
1.
Install relief valve (2) on filter-separator (1).
2.
Install 15 elements (4) on guide pipes in filter-separator (1) beginning with guide pipes farthest from service port.
3.
Install 15 retainers (3) on elements (4) and handtighten only. Do not overlighten.
4.
Install new gasket (13) on adapter (14).
5.
Install three fuses (12) in adapter (14). Push elements into holes and install fuse clip (11) on fuses. Install new
gasket (15) on adapter.
6.
Slide canister (10) over fuse (12) assembly and push canister into adapter (14).
7.
Repeat steps 4 through 6 to assemble four remaining canister (10) assemblies.
8.
Insert canister (10) assembly through service port with adapter (14) end down toward bottom of tank. Turn
adapter end left and lift canister assembly into position on upper guide rods farthest from service port. Slide
canister assembly to left until it fits into the outlet hole.
TA702810
4-183
|