|
| |
TM 9-2330-272-14
4-85. FILTER-SEPARATOR REPLACEMENT (M131A5C LATE MODEL).
This Task Covers:
a .
Removal
b .
Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
Tank purged (para 4-64).
Two gaskets
Tools/Test Equipment:
General mechanic’s tool kit
Personnel Required: Two
Common no. 1 shop set
1.
Position suitable lifting device under filter-separator (1).
2.
Remove four nuts (5), screws (3), and two couplers (2) from filter-separator (1) and tubes (4).
3.
Remove two gaskets (6) from filter-separator (1). Discard gaskets.
4.
Remove filter-separator (1) from semitrailer.
1.
Position filter-separator (1) on semitrailer.
2.
Position two new gaskets (6) on tubes (4) and filter-separator (1).
3.
Install two couplers (2) on filter-separator (1) and tubes (4) with four screws (3) and nuts (5).
TA702807
4-178
|
