|
| |
TM 9-2330-272-14
4-80. AUXILIARY ENGINE INSTRUMENT PANEL SWITCHES AND GAGES
REPLACEMENT (Con’t).
1 .
2.
3.
4.
5.
NOTE
Oil pressure gage and system voltage gage are replaced the same way on all models.
This task covers M131A5 oil pressure gage.
Tag wires for installation if identification bands are missing or not legible (para 4-20).
Disconnect two plug connectors (14) from gage (11).
Remove two nuts (13), bracket (12), and gage (11) from instrument panel (1).
Position gage (11) in instrument panel (1) and Install bracket (12) with two nuts (13).
Connect two plug connectors (14) to gage (11).
NOTE
Filter-separator pressure gages are replaced the same way. This task covers filter
outlet pressure gage.
1.
Disconnect plug connector (18) from gage (15).
2.
Remove two nuts (17), brackets (16), and gage (15) from instrument panel (1).
3.
Position gage (15) in instrument panel (1) and install two brackets (16) and nuts (17).
4 .
Connect plug connector (18) to gage (15).
TA702800
4-170
|
