|
| |
TM 9-2330-272-14
4-80. AUXILIARY ENGINE INSTRUMENT PANEL SWITCHES AND GAGES
REPLACEMENT.
This Task Covers:
a.
Panel Power and Ignition Switches Replacement
d. Filter-separator Pressure Gages Replacement
b.
Starter Switch Replacement
(M131A5C)
c.
Oil Pressure and System Voltage Gages
Replacement
Initial Setup:
Equipment Conditions:
Materials/Parts:
Battery cables disconnected (para 4-25).
Marker tags (Item 17, Appendix E)
Tools/Test Equipment:
General mechanic’s tool kit
NOTE
Panel power switch and ignition switch are replaced the same way on all models. This
task covers M131A5 panel power switch.
1.
Tag wires for installation if identification bands are missing or not legible (para 4-20).
2 .
Disconnect two plug connectors (3) from switch (2).
3 .
Remove two screws (5), washers (4), and switch (2) from instrument panel (1).
4.
Install switch (2) on instrument panel (1) with two washers (4) and screws (5).
5.
Connect two plug connectors (3) to switch (2).
TA702798
4-168
|
