| |
TM 9-2330-272-14
4-76. FUEL LINES AND FITTINGS REPLACEMENT (M131A5C).
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
l Auxiliary engine sediment strainer shutoff cock
l Rags (Item 14, Appendix E)
closed (para 4-73).
References:
Tools/Test Equipment:
l General mechanics tool kit
l Common no. 1 shop set
l TM 5-2805-258-14
NOTE
A suitable container should be used to catch any draining fuel. Ensure that all spills are
cleaned up.
1.
Disconnect fuel line (2) from adapter (6). Remove adapter from auxiliary engine sediment strainer
2.
Remove auxiliary engine access cover (TM 5-2805-258-1 4).
3.
Disconnect fuel line (7) from adapter (9). Remove adapter from fuel filter (8).
4.
Remove fuel lines (2 and 7) from nipple (1).
5.
Remove fuel line (2) from firewall (4).
6.
If damaged, remove two grommets (3) from firewall (4). Discard grommets.
b .
INSTALLATION
(5).
1.
If removed, install two new grommets (3) in firewall (4).
2.
Position fuel line (2) through firewall (4).
3.
Install fuel lines (2 and 7) on nipple (1).
4.
Install adapter (9) on fuel filter (8). Connect fuel line (7) to adapter.
5.
Install auxiliary engine access cover (TM 5-2805-258-14).
6.
Install adapter (5) on auxiliary engine sediment strainer (5). Connect fuel line (2) to adapter.
4-158
|