|
| |
TM 9-2330-272-14
4-61.
CABINET DOOR LATCHES AND HINGES REPLACEMENT.
This Task Covers:
a.
Removal
b. Installation
Initial Setup:
Materials/Parts:
Tools/Test Equipment:
l One seal
l General mechanic’s tool kit
l Three cotter pins (M131A4 and M131A4C)
l Four rivets
l Five Iockwashers (M131A4 and M131A4C)
1.
2.
3.
4.
5.
6.
7.
8.
9.
NOTE
Perform steps 1 through 7 on M131A4 and M131A4C only.
Remove cotter pin (9), pin (8), and rod (14) from hinge (11). Discard cotter pin.
Remove three nuts (5), Iockwashers (6), screws (10), and hinge (1 1) from cabinet door (7). Discard
Iockwashers.
Remove rod (14) from fitting (22).
Remove adjusting link (12) and nut (13) from rod (14).
Remove cotter pin (4), nut (3), and fitting (22) from mounting plate (24) and bracket (25) Discard cotter pin.
Remove cotter pin (21), spring (19), and bearing (20) from fitting (22). Discard cotter pin.
Remove two nuts (2), Iockwashers (1), screws (23), and mounting plate (24) from bracket (25). Discard
Iockwashers.
Remove four rivets (17) and latch assembly (18) from two brackets (16) and cabinet door (7). Discard rivets.
Remove seal (15) from cabinet door (7), Discard seal.
b. INSTALLATION
1.
Install new seal (15) in cabinet door (7).
2.
Position latch assembly (18) in two brackets (16) on cabinet door (7) and install four new rivets (17).
3.
Install
4.
Install
5.
Install
4-122
NOTE
Perform steps 3 through 10 for M131A4 and M131A4C only.
mounting plate (24) on bracket (25) with two screws (23), new Iockwashers (1), and nuts (2)
bearing (20) and spring (19) in fitting (22) with new cotter pin (21).
fitting (22) on mounting plate (24) and bracket (25) with nut (3) and new cotter pin (4).
|
