|
| |
TM 9-2330-272-14
4-60. STOWAGE TUBE ASSEMBLY REPLACEMENT (Con’t).
2.
Install two screws (19), washers (20), new Iockwashers (26), and nuts (25) on front stowage tube end assembly
(27).
3.
Install two screws (13), washers (14), new Iockwashers (16), and nuts (17) on bracket (15).
4.
Install three screws (4), washers (5), new Iockwashers (11), and nuts (12) on rear stowage tube end assembly
(3) and support (10).
5.
Install fastener (23) on front stowage tube end assembly (27) with three screws (24), new Iockwashers (22), and
nuts (21).
6.
Apply adhesive to grommet strip (18) and install on front stowage tube end assembly (27).
4-120
|
