|
| |
TM 9-2330-272-14
4-58. HOSE REEL REPLACEMENT (M131A4C AND M131A5C).
This Task Covers: Replacement
Initial Setup:
Equipment Conditions:
Materials/Parts:
• Hose removed (para 4 68).
• Four Iockwashers
Tools/Test Equipment:
Personnel Required: Two
• General mechanic’s tool kit
1.
Remove two nuts (11), screws (4), and coupler (3) from tube (1) and packing joint (5).
2
Remove gasket (2) from packing joint (5) and tube (1).
3
Remove four nuts (10), lockwashers (9), screws (8), and hose reel (6) from cabinet (7). Discard Iockwashers.
4
Install hose reel (6) in cabinet (7) with four screws (8), new lockwashers (9), and nuts (10).
5.
Slide gasket (2) over packing joint (5) and tube (1) No portion of gasket should extend into groove on tube.
CAUTION
Uneven tightening of nuts may cause gasket to pinch.
6.
Install coupler over gasket (2) with two screws (4) and nuts (11). Tighten nuts evenly until coupler halves are
firmly together metal to metal.
FOLLOW-ON TASKS:
• Install hose (para 4-68).
4-115
|
