|
| |
TM 9-2330-272-14
4-43. WHEEL AND TIRE MAINTENANCE (Cont't)
6.
7
Remove ten wheel nuts (13) and outer wheel (12) front capnuts (11).
Remove ten capnuts (11) and inner wheel (10) from wheel studs (9).
Refer to TM 9-2610-200-14 for instructions on dismounting and mounting tire and tube, and for repairing tube.
CAUTION
Do not mix cross-country tires with highway tires on an axle.
1.
Position inner wheel (10) on wheel studs (9) with convex side facing out. Install ten capnuts (11) fingertight in
sequence shown.
NOTE
Ensure that valve stem for outer wheel is ap-
proximately 180’ away from valve stem of in-
ner wheel.
2
Position outer wheel (12) on capnuts (11) with
convex side facing in. Install ten wheel nuts (13)
fingertight in sequence shown.
3.
Lower floor jack until wheels (10 and 12) are on
ground. Remove floor jack.
4.
Torque ten capnuts (11) and wheel nuts (13) to
450 470 lb.-ft (610 - 637 N•m) in sequence
shown.
TA702738
4-81
|
