|
| |
TM 9-2330-272-14
4-39. AIR LINES AND FITTINGS REPLACEMENT (Con’t).
4.
5.
6.
NOTE
For information on manufacturing air tube refer to Appendix F.
Apply antiseizing tape to elbow (20) and install elbow and air tube (18) on relay valve (12).
Apply antiseizing tape to elbow (17) and install elbow and air tube (18) on forward airbrake chamber (16).
. Use caution when installing air tube at clips. When securing air tube under clips, a
soft-faced hammer should be used to tap clips back into place. Improper handling of
clips will cause them to break.
. If two or more consecutive clips are missing or damaged, air tube will not be
adequately supported. Damage to air tube may result.
Install air tube (18) in clips (19). Gently bend clips over air tube. Notify Direct Support Maintenance if two or more
consecutive clips are damaged at installation.
d .
REAR AIRBRAKE CHAMBER-TO-RELAY VALVE AIR TUBE REPLACEMENT
1.
Remove air tube (23) and elbow (22) from rear airbrake chamber (21).
2.
Remove air tube (23) and elbow (24) from relay valve (12).
4-73
|
