|
| |
TM 9-2330-272-14
4-32. MASTER CYLINDER REPLACEMENT (Con’t).
3.
Remove retaining strap (16) and bellows (17) from master cylinder (10).
4.
Loosen clamp (8) and remove hose (9) from vent tube (7).
5.
Remove vent tube (7), filler cap (6), and gasket (5) from master cylinder (10). Discard gasket.
6.
If bracket (2) is damaged, remove three locknuts (4), screws (1), and bracket from crossmember (3). Discard
locknuts.
b.
INSTALLATION
1.
if removed, install bracket (2) on crossmember (3) with three screws (1) and new locknuts (4).
2.
Install new gasket (5), filler cap (6), and vent tube (7) on master cylinder (10).
NOTE
For information of manufacturing hose refer to Appendix F.
3.
Install hose (9) on vent tube (7) and tighten clamp (8).
4.
Install bellows (17) and retaining strap (16) on master cylinder (10).
5.
Position master cylinder (10) on bracket (2) and install three new Iockwashers (15) and nuts (14).
6.
Install new gasket (11), straight adapter (12), and hose assembly (13) on master cylinder (10).
FOLLOW-ON TASKS:
l Install airbrake chamber, if removed (para 4-38).
l Bleed brakes (para 4-35).
4-55
|
