| |
TM 9-2330-272-14
4-27. WIRING REPAIR.
This Task Covers:
Identification Band Replacement
d.
Female Connector Repair
b.
Terminal Replacement
Plug Assembly Repair
c.
Male Connector Repair
f .
Receptacle Repair
Initial Setup:
Equipment Conditions:
Materials/Parts:
l InterVehicular cable disconnected from semitrailer
l Solder (item 15, Appendix E)
(para 2-12).
l Contacts (as required)
l identification bands (as required)
Tools/Test Equipment:
l Terminal assemblies (as required)
l General mechanics tool kit
l Terminals (as required)
l Common no. 1 shop set
a .
lDENTIFiCATION BAND REPLACEMENT
1.
Remove identification band (2) from wire lead (1)
and discard.
2.
Mark new identification band (2) with proper
identification number.
3.
Position new identification band (2) on wire lead
(1) and bend tabs over wire lead.
b.
TERMINAL REPLACEMENT
1.
Cut terminal (3) off wire lead (4) and discard.
2.
Strip insulation off wire lead (4) equal to depth of
new terminal (3).
3.
Position new terminal (3) on wire lead (4). Crimp
terminal.
4-38
|