|
| |
TM 9-2330-272-14
4-23. BLACKOUT STOPLIGHT MAINTENANCE (EARLY MODEL).
This Task Covers:
a.
Lamp Replacement
c.
Installation
b. Removal
Initial Setup:
Equipment Condltlons:
Materials/Parts:
l Intervehicular cable disconnected from semitrailer
i Five Iockwashers
(para 2-12).
Tools/Test Equipment:
l General mechanic’s tool kit
a .
LAMP REPLACEMENT
1.
Remove two screws (1) and door (2) from housing (4).
2.
Inspect gasket (3) for damage. If damaged, remove and discard.
3.
Remove lamp (6) from socket (5) by pushing lamp in and turning counterclockwise.
4.
Install lamp (6) in socket (5) by pushing lamp in and turning clockwise.
5.
If removed, install new gasket (3) in door (2).
6.
Install door (2) on housing (4) with two screws (1).
b .
REMOVAL
1.
Remove four nuts (12), Iockwashers (11), screws (7), bracket (8), and gasket (9) from frame (10), Discard
Iockwashers.
2.
Disconnect plug connector (13) from housing (4).
3.
Remove bolt (15), Iockwasher (14), and housing (4) from bracket (8). Discard Iockwasher.
4-28
|
