|
| |
TM 9-2330-272-14
4-21. CLEARANCE MARKER LIGHT MAINTENANCE (Con’t).
a . R E M O V A L
1.
2.
3.
4.
5.
NOTE
If removing lamp only, perform steps 1 and 2.
Remove two screws (8) and door (7) from base (4). Remove lens (6) from door.
Remove lamp (5) from socket (10) by pushing lamp in and turning counterclockwise.
Remove four screws (9) and pull base (4) out of frame (11).
Disconnect plug connectors (1 and 2).
Remove base (4) and pad (3) from frame (11).
b .
INSTALLATION
NOTE
if installing lamp only, perform steps 3 and 4.
1.
Position pad (3) on base (4) and connect plug connectors (1 and 2).
2.
Install pad (3) and base (4) on frame (11) with four screws (9).
4-24
|
