|
| |
TM 9-2330-272-14
2-24. REFUEL ON THE MOVE (ROM) ASSEMBLY AND OPERATING PROCEDURES
(M131A5C).
WARNING
Fuel handlers must wear appropriate safety equipment
precautions to avoid serious injury or death to personnel.
NOTE
and follow all safety
Components of the Refuel on the Move (ROM) Assembly Kit are listed in Appendix D.
a. Assembly of ROM Components.
(1) Select refuel site and park M131A5C semitrailer at right side of road or route.
(2) Open ROM container. Unpack instruction sheet and inventory sheet from container. Take inventory
of ROM components.
NOTE
Remove plugs and dust caps as required from ROM components as they are
assembled.
(3) Extend 2 1/2 in. hose from hose reel to desired length. Remove nozzle assembly P/N 10959970 from
hose end. Assemble bushing P/N MS14315-31X to hose end, Assemble coupling P/N MS70097-3 to bushing and to
tee assembly P/N 5-14-676C.
(4) Assemble reducers P/N MS49000-1 and MS49000-9 to tee assembly P/N 5-14-676C per instruction
sheet. Assemble one valve assembly P/N 13222E9888 to each reducer.
(5) Assemble 3 in, hose assembly P/N 543-419-3-50 to each valve assembly P/N 13222E9888.
Assemble 3 in. X3 in. x 1 1/2 in. tee assembly P/N 13222E9884 to each hose assembly.
(6) Assemble 3 in. hose assembly P/N 543-419-3-50 to each 3 in. x3 in. x 1 1/2 in. tee assembly
P/N 13222E9884.
(7) Continue to assemble valve assemblies, 3 in. hose assemblies, and 3 in. x3 in. x 1 1/2 in. tee
assemblies per instruction sheet.
(8) Assemble eight 1 1/2 in. hose assemblies P/N M370B05B2C3000 to 3 in. x3 in. x 1 1/2 in. tee
assemblies P/N 13222E9884 per instruction sheet.
(9) Assemble eight couplings P/N MS27026-9 to nozzle assemblies P/N 10896274 or 12275441-2.
Assemble each nozzle assembly to each 1 1/2 in. hose assembly P/N M370B05B2C3000.
NOTE
Operator may locally assemble ground wire assembly using 25 ft (7.6 m) of no. 14 gage
wire and alligator clamps, one at each end.
(10) Remove ground rods P/N 13219E0462 from ROM container. Drive well into ground (FM 10-68).
Place nozzle assembly P/N 108$16274 or 12275441-2 on groulnd rod handle. Connect alligator clamp of one end of
ground wire assembly to ground rod.
(11) Remove fire extinguishers P/N K20E from ROM container and place by each nozzle assembly
P/N 10896274 or 12275441-2 at fueling point.
(12) Stow unused ROM components in ROM container.
2-78
|
