|
| |
1-5.
General.
TM 55-4920-383-13&P
Section II. DESCRIPTION AND LEADING PARTICULARS
The Test Set is housed within an aluminum combination case which serves as a means of
easily transporting the Test Set as well as sealing the Test Set internal mechanism and
circuitry from the ambient environment. The aluminum cover is secured to the combination
case with two removable hinges on the rear and two trunk style latches on the front of the
case. The body of the combination case is divided into two sections. The low section
1-6.
Leading Particulars.
The leading particulars
houses the Test Set unit the upper section of the case and the Test Set cover provide storage
space for the accessory cables. The Test Set is operated within the combination case with
the cover fully open or removed, with the Test Set on an approximately horizontal plane as
shown in figure 1-1.
of the Test Set are listed in table 1-1.
1-7.
Equipment Supplied.
A list of the accessory cables supplied as part of the Test Set is contained in table 1-2.
The accessory cables are used to provide input power and ground to the Test Set and to
interconnect the Test Set and the equipment to be tested. A BNC tee connector is also
supplied with the Test Set.
1-8.
Test Equipment, Special Tools and Materials.
Special tools and test equipment required for maintenance of the Test Set are listed in
table 1-3.
1-9.
Consumable Materials.
All consumable materials required for maintenance of the Test Set are listed in table 1-4.
1-3
|
