|
| |
TM 55-2915-335-30&P
(4) Spare/repair parts that make up an assembly item are listed immediately following the assembled item line
entry.
(5) Part numbers for bulk materials are
manufactured/fabricated. Bulk materials required
Group of this RPSTL.
referenced in this column in the line entry for the item to be
to manufacture items are listed in the Bulk Material Functional
(6) When the item is not used with all serial numbers of the same model, the effective serial numbers are
shown on the last line(s) of the description (before UOC).
(7) The usable on code, when applicable.
(8) In the Special Tools List section, the basis of issue (BOI) appears as the last line(s) in the entry for each
special tool, special TMDE, and other special support equipment. When density of equipment supported exceeds den-
sity spread indicated in the basis of issue, the total authorization is increased proportionately.
(9) The statement “END OF FIGURE” appears just below the last item description in Column 5 for a given
figure in both Section II and Section III.
f. QTY [Column (6)]. The Qty (quantity per figure column) indicates the quantity of the item used in the
breakout shown on the illustration figure, which is prepared for a functional group, subfunctional group, or an as-
sembly. A “V” appearing in this column in lieu of a quantity indicates that the quantity may vary from application to
application.
B-4. Explanation of Columns (Section IV).
a. NATIONAL STOCK NUMBER (NSN) INDEX.
(1) STOCK NUMBER Column. This column lists the NSN by National item identification number
NSN
(NIIN) sequence. The NIIN consists of the last nine digits of the NSN (i.e., 5305-01-674-1467). When using this
NIIN
column to locate an item, ignore the first 4 digits of the NSN. However, the complete NSN should be used when or-
dering items by stock number.
(2) FIG. Column. This column lists the number of the figure where the item is identified/located. The figures
are in numerical order in Section II and III. Items which have the word BULK in the figure column will have an index
number shown in the item number column. This index number is a cross-reference between the National Stock Num-
ber and the material list in Section H.
(3) ITEM Column. The item number identifies the item associated with the figure listed in the adjacent FIG.
column. This item is also identified by the NSN listed on the same line.
b. PART NUMBER INDEX. Part numbers in this index are listed by part number in ascending alphanumeric
sequence (i.e., vertical arrangement of letter and number combination which places the first letter or digit of each
group in order A through Z, followed by the numbers 0 through 9 and each following letter or digit in like order).
(1) FSCM Column. The Federal Supply Code for Manufacturers (FSCM) is a 5-digit numeric code used to
identify the manufacturer, distributor, or Government agency, etc., that supplies the item.
B-5
|
