PREPARATION FOR RESHIPMENT Test kits may be reshipped in the original containers supplied by the manufacturer, they are packed 20 to a style I overseas type wooden box conforming to PPP-B-636 minimum grade W5c, style FPF. No special preparation is required for reshipment as originally packaged. If repackaging the kit, no special disassembly or component packaging is required. The kit is shipped as a unit with exterior packaging as in the original The tester and instruction card are secured inside the transit case which should be latched shut. The kit shall then be completely wrapped in cushioning material conforming to PPP-C-1799, type I, 3/32 inches thick and held in peace with pressure sensitive tape conforming to MIL-T-22085, type II or equivalent The wrapped kit shall then be placed in a snug fitting fibreboard box conforming to PPP-B 636, minimum grade W5c, style FPF, before repacking In the wooden boxes. Shipping cases and boxes in good condition may be reused. STORAGE The captured fuel test kit is packaged for indoor storage and storage temperatures must not exceed 63 degrees C (145 degrees F) or fall below minus 33 degrees C (minus 27 degrees F). The facilities should be dry with no special ventilation required. Page 10

Test Kit for Captured Fuel TM 5 6630 217-10 PREPARATION FOR RESHIPMENT Test kits may be reshipped in the original containers supplied by the manufacturer, they are packed 20 to a style I overseas type wooden box conforming to PPP-B-636 minimum grade W5c, style FPF. No special preparation is required for reshipment as originally packaged. If repackaging the kit, no special disassembly or component packaging is required. The kit is shipped as a unit with exterior packaging as in the original The tester and instruction card are secured inside the transit case which should be latched shut. The kit shall then be completely wrapped in cushioning material conforming to PPP-C-1799, type I, 3/32 inches thick and held in peace with pressure sensitive tape conforming to MIL-T-22085, type II or equivalent The wrapped kit shall then be placed in a snug fitting fibreboard box conforming to PPP-B 636, minimum grade W5c, style FPF, before repacking In the wooden boxes. Shipping cases and boxes in good condition may be reused. STORAGE The captured fuel test kit is packaged for indoor storage and storage temperatures must not exceed 63 degrees C (145 degrees F) or fall below minus 33 degrees C (minus 27 degrees F). The facilities should be dry with no special ventilation required. Page 10