|
| |
TM j-5430-219-13
Key
1
Control or .
Indicator
Gate, butterfly or ball valve
Vent and pipe assembly
Drain gate or ball valve
Function
Shuts fuel flow on and off between the tank and
any other portion of the system.
Allows relief cap to open automatically when
the tank vapor reaches an internal pressure of
0.1 psi (0.0068 atmospheres).
Allows residual fuel, sludge, or water to be
drained from the tank when needed.
Section
II.
OPERATOR
PREVENTIVE MAINTENANCE CHECKS AND SERVICES
(PMCS)
2-2. GENERAL
I
The 3,000-gallon, lO,OOO-gallon, 20,000-gallon, or 50,000-gallon collapsible fabric tank
must be inspected regularly to find and correct defects (refer to table 2-l.)
212.1 Before You Onerate. Always keep in mind the CAUTIONS and WARNINGS. Perform
your before (B) operation PMCS.
2-2.2 While You Operate. Always keep in mind the CAUTIONS and WARNINGS. Perform
your during (D) operation PMCS.
2-2.3 After You Operate. Be sure to perform your after (A) operation PMCS.
.
2-2.4 If Yemment Fails to Onerate. Refer to table 2-l and troubleshoot using correct
equipment.
Refer to DA Pam 738-750 and report any deficiencies using the correct forms.
2-3. PMCS PROCEDURES.
2-3.1
Your Preventive Maintenance Checks and Services (PMCS) (table 2-l) lists the inspections
and care of your equipment required to keep it in good operating condition.
2-3.2 Use the “Item No.” column of the PMCS table to supply the item number used in the “TM
Number” column of DA Form 2404.
2-3-3
The interval column of your PMCS table tells you when to do a certain check or service.
2-2 Change 5
|
