|
| |
do not try to reinstall it immediately. Wait until it has dried out, or install a new O-ring.
(7) Place closure plate onto tank plate assembly.
(8) Place washers over bolts. Insert bolts through closure plate and into tapped holes in tank fitting. Using
wrench, tighten bolts.
(9) Place elbow gasket into elbow.
(10)
Place elbow onto flanged adapter. Pull cam arms inward until they lock.
4-11.
DRAIN ASSEMBLY. See figure 4-4.
a.
Disassembly.
(1) Using wrench, remove bolts and washers attaching drain assembly to tank fitting.
(2) Remove drain fitting and attached hardware.
(3) Remove O-ring from groove in tank fitting.
(4) Turn valve counterclockwise to disconnect it from drain hose. Remove valve.
(5) Turn drain hose counterclockwise to disconnect it from drain fitting. Remove hose.
b.
Repair and Replacement.
(1) Clean all parts by wiping with a cloth.
(2) Inspect all parts for cracks, dents, breaks, or wear. If any parts are no longer serviceable, replace before
reassembly.
(3) Pull cam arms on hose assembly female coupling outward. Remove hose assembly from valve
assembly.
(4) Remove gaskets from hose assembly female coupling and valve assembly female dust cap.
4-17
|
