|
| |
TM 5-5430-210-12
CHAPTER 3
MAINTENANCE INSTRUCTIONS (ALL TANKS)
Section I.
LUBRICATION INSTRUCTIONS
NOTE
All Cam Lever Pins and Lobes should be lubricated
semi-annually with two (2) drops of OE 30 engine oil.
Section II. PREVENTIVE MAINTENANCE CHECKS AND SERVICES (PMCS)
3-1. General. To ensure that the equipment is
ready for operation at all times, it must be inspected
systematically so that defect may be discovered
and corrected before they result in serious damage
or failure. The necessary preventive maintenance
checks and cervices are listed in table 3.1. Defects
discovered during operation of the system shall be
noted for future correction to be made as soon as
operation has ceased. All deficiencies and short-
comings will be recorded together with the cor-
rective action taken on DA Form 2404 (Equipment
Inspection and Maintenance Worksheet) at the ear-
liest possible opportunity.
C A U T I ON
Stop operation immediately if a defi-
ciency is noticed which would dam-
age the equipment if operations were
continued, or jeopardize the safety of
operating personnel.
Change 2 3-1
|
