|
| |
TM 5-4930-237-10
c.
Item Number Column. Item numbers in this column shall be listed in the TM Item Number column on DA
Form 2404 in recording results of PMCS. Items are listed regardless of interval.
d.
Interval Column. These columns are headed "B" (before), "D" (during), "A" (after), "W" (weekly), and "M"
(monthly. A dot (•) in the interval column indicates when the PMCS shall occur.
e.
Item to be Inspected Column. This column lists the item to be inspected.
f.
Procedures Column. This column describes what must be done to the item.
g.
For Readiness Reporting, Equipment is Not Reedy/Available if: Column. This column contains conditions
which would prevent the equipment from performing its primary function.
NOTE
If equipment must be kept in continuous operation, check and service only those items that can
be checked and serviced without disturbing operation. Make the complete checks and services when
the equipment can be shut down.
Within designated interval, these checks are to be performed in the sequential order listed.
Table 2-1. Preventive Maintenance Checks and Services (PMCS)
B-Before D-During A-After W-Weekly M-Monthly
Item
No.
1
2
3
Interval
B
D
A
W
M
Item to be
Inspected
3 inch
Discharge
Hose
Tee Con-
nector
Procedures
Check for and have
Repaired or adjusted
Check for damaged valve bodies
on hose and signs of leaks or
cracks.
Check camlock body for gasket
damage or loss.
Check cam arms for cracks or
damage.
Check sexless body for seals/
boot damage or loss.
Check dust cap for damage or
loss.
Open flow handle and check for
interlocking pin extension on con-
nector face.
Check strap for damage. Check
buckle for signs of distortion or
cracks.
Check for damaged body. and
signs of leaks or cracks.
Check body for seals/boot dam-
age or loss
Check dust caps for damage or
loss.
For Readiness Reporting, Equip
ment is Not
Ready/Available If:
Outward signs of damage or
leakage.
Gasket damaged or missing.
Outward signs of damage.
Seals/boot damaged or missing.
Dust cap damaged or missing,
Row handle doss not operate
smoothly; pin doss not extend.
Outward signs of damage.
Outward signs of damage or
leakage.
Seals/boot damaged or missing.
Dust cap damaged or missing.
Change 3 2-9
|
