| |
TM 5-4930-235-13&P
Tools - Continued
Multimeter (Item 11, Section III, Appendix B)
Materials/Parts
Lint-free Cloth, MIL-C-85043 (Item 1, Appendix G)
Thread Sealing Compound, MIL-S-45180 (Item 2, Appendix G)
Dry Cleaning Solvent, P-D-680, Type II (Item 3, Appendix G)
Aluminum Oxide Abrasive Cloth, P-C-451 (Item 5, Appendix G)
Paint, MIL-C-46168 (Item 6, Appendix G)
Masking Tape (Item 7, Appendix G)
Cushioning Material, PPP-C-843 (Item 8, Appendix G)
Water-Vaporproof Bag, MIL-B-117 (Item 9, Appendix G)
Fiberboard Container, PPP-B-636 (Item 10, Appendix G)
Major Repair Kit, 125-17101
Minor Repair Kit, 125-17100
WARNING
Aviation fuel is highly flammable. No smoking or open flames are permitted in maintenance area.
Failure to comply can result in injury or death of personnel.
Proper eye protection must be worn. Failure to comply can result in injury or death of personnel.
CAUTION
Before disassembly, wipe exterior of nozzle with a clean cloth to remove dust, dirt, grease or fuel
residue to prevent contamination of internal parts.
a. Disassembly.
(1) Remove capscrew (1, Figure 5-1), ground clip assembly (2), and ground plug assembly (3) from nozzle
subassembly (1 2).
(2) Remove outlet cap assembly (4) and dust plug (5) from ring (6). Remove ring (6) from nozzle
subassembly (1 2).
NOTE
Ring can be left on nozzle subassembly unless replacement is required.
(3) Turn coupling half (7) and strainer body (8) counterclockwise to remove from nozzle subassembly (12).
Change 2
5-4
|