|
| |
TM 5-4930-234-13&P
Figure 5-9. Nose Sleeve Removal
Figure 5-10. Adapter Removal
NOTE
Do not remove label or decal unless replacement is required.
b.
Cleaning.
Do not use wire brushes or wire wheels to clean parts. Failure to comply earn result in damage to
metal finish of parts.
1.
Wipe metal parts with a clean, lint-free cloth to remove fuel, dust or other foreign material.
2.
Remove heavy deposits of dirt or grease with a soft bristled brush dipped in cleaning solvent (Item 2,
Appendix E). Use low pressure, filtered air to dry parts.
3.
As required, flush body (49) with cleaning solvent (Item 2, Appendix E) to remove fuel and foreign
material from internal passages. Use low pressure, filtered air to dry body (49).
5-16
|
