|
| |
TM 5-4930-234-13&P
17. Wipe exterior of nozzle (12) and cables with a dean, lint-free cloth to remove dust, dirt, moisture, or fuel.
Do not leave nozzle laying on ground. Failure to comply can result in damage to nozzle.
18.
Place nozzle (12) in a storage container away from aircraft
2-6.
DISCONNECTION OF N0771 F, MODEL AE83206R.
NOTE
Have a suitable container available to catch any fuel spillage.
1.
pull cam arms (1) away from coupling (2).
2.
Remove fuel hose (4) from coupling (2).
3.
Slide end of dust plug (3) into coupling (2).
4.
Push cam arms (1) against coupling (2).
2-7.
CONNECTION OF NOZZLE, MODEL AF83501R. (FIRGURE 2-3).
WARNING
Never attempt to connect a nozzle with a unisex inlet (nozzle part number AE83501 R) to any coupling
produced by a manufacturer other than Aeroquip Corporation. Failure to heed this warning could result in
nozzle disconnecting and possible loss of aircraft and/or life.
WARNING
For refueling operations, confirm that the inlet coupling is stamped with part number AE70725R before
using a nozzle with a unisex inlet coupling (nozzle part number AE83501 R). Failure to heed this warning
could result in loss of aircraft and/or life.
1.
Turn dust cap (1) counterclockwise and remove from coupling (2).
2.
Insert end of fuel hose (4) in coupling (2).
3.
Turn fuel hose (4) clockwise to lock with coupling (2).
4.
Turn handle (5) on fuel hose coupling to FLOW position.
2-8.
OPERATION OF NOZZLE, MODEL AE3501R
WARNING
Ground dip and ground plug must be attached before connecting nozzle to aircraft. Failure to comply can
result in severe electric shock and injury or death to personnel.
1.
As required, uncoil cable on ground dip (6). Connect ground dip (6) to grounding rod.
Change 6 2-6
|
