|
| |
TM 5-4930-226-12&P
e. Federal Supply Code for Manufacturer
(FSCM), The FSCM is a 5-digit numeric code listed
in SB 708-42 which is used to identify the manu-
facturer, distributor, or Government agency, etc.
f. Description. Indicates the Federal item
name and, if required, a minimum description to
identify the item. Items that are included in kits
and sets are listed below the name of the kit or set
with the quantity of each item in the kit or set indi-
cated in the quantity incorporated in unit column.
When the part to be used differs between serial
numbers of the same model, the effective serial
numbers are shown as the last line of the descrip-
tion. In the Special Tools List, the initial basis of
issue (BOI) appears as the last line in the entry for
each special tool, special TM DE, and other special
support equipment. When density of equipments
supported exceeds density spread indicated in the
basis of issue, the total authorization is increased
accordingly.
g. Unit of Measure (U/M). Indicates the stan-
dard of the basic quantity of the listed item as used
in performing the actual maintenance function.
This measure is expressed by a two-character alpha-
betical abbreviation (e.g., ea, in, pr, etc.). When the
unit of measure differs from the unit of issue, the
lowest unit of issue that will satisfy the required
units of measure will be requisitioned.
h. Quantity Incorporated in Unit. Indicates
the quantity of the item used in the breakout shown
on the illustration figure, which is prepared for a
functional group, sub functional group, or an assem-
bly. A “V” appearing in this column in lieu of a
quantity indicates that no specific quantity is appli-
cable (e.g., shims, spacers, etc.).
E-4. How to Locate Repair Parts
a. When National Stock Number or Part Num-
ber is Unknown:
(1) First. Using the table of contents, deter-
mine the functional group within which the item
belongs. This is necessary since illustrations are
prepared for functional groups and listings are di-
vided into the same groups.
(2) Second, Find the illustration covering
the functional group to which the item belongs.
(3) Third. Identify the item on the illustra-
tion and note the illustration figure and item num-
ber of the item.
(4) Fourth. Using the Repair Parts Listing,
find the figure and item number noted on the illus-
tration.
b. When National Stock Number or Part Num-
ber is Known:
(1) First. Using the Index of National Stock
Numbers and Part Numbers, find the pertinent Na-
tional stock number or part number. This index is in
NIIN sequence followed by a list of part numbers in
alphameric sequence, cross-referenced to the illus-
tration figure number and item number.
(2) Second. After finding the figure and item
number, locate the figure and item number in the
repair parts list,
Change 1
E-3
|
