|
| |
TM 5-4320-313-14
5-9. CYLINDER HEAD AND VALVE ASSEMBLY.
This task consists of:
a.
Removal
b.
Cleaning
c.
Inspection
d. Installation
e.
Adjustment
INITIAL SETUP:
Tools Required:
Tool Kit, General Mechanics (item 1, appendix B)
Retaining Bracket (item 21, appendix B)
Depth Gauge (item 20, appendix B)
Torque Wrench (item 2, appendix B)
Materials Required:
Gasket, P/N 03208902
Gasket, P/N 03770300
Gasket, P/N 5025806
Rags, Wiping (item 8, appendix E)
Solvent, Cleaning (item 10, appendix E)
General Safety Instructions:
Well-ventilated area required.
Equipment Conditions:
Pumping assembly shut down in accordance with paragraph 2-6.
Fuel tank removed in accordance with paragraph 4-15.
Muffler removed in accordance with paragraph 4-16.
Injector removed from cylinder head in accordance with paragraph 5-6.
Air cleaner removed in accordance with paragraph 4-10.
a. Removal. (Refer to figure 5-16).
(1) Remove screw (1) and nut (2) from cowling (3).
(2) Remove cowling (3) from engine.
5-28
|
